F22.50德國PTL萬用型彈簧沖擊錘
產地：德國
產品型號： F22.50
F22.50德國PTL萬用型彈簧沖擊錘符合標準IEC60068-2-75/1997-08等，用于電子電工產品的抗撞機能力的測試，是檢測電器產品外殼在承受機械外力情況下**性能必需的試驗器具。F22.50德國PTL萬用型彈簧沖擊錘適用于家用和類似用途電器、電子產品、燈具、電器附件的外殼、操作桿、手柄、旋鈕、指示燈、信號燈及燈罩等進行機械強度試驗，以保證被試產品能夠承受可能發生的魯莽操作和其它意外，電器產品能夠**可靠的運行，不會對人生傷害.
F22.50德國PTL萬用型彈簧沖擊錘技術參數：
型號 沖擊能量 公差
F22.10 0.14J +/-0.014J
F22.11 0.20J +/-0.02J
F22.15 0.35J +/-0.03J
F22.16 0.50J +/-0.04J
F22.17 0.70J +/-0.05J
F22.18 1.00J +/-0.05J
F22.20為單檔，沖擊能量為：2.00J
F22.50有五個適當的沖擊能量0.20J,0.35J,0.50J,0.70J和1.00J
長 度： 211mm
重 量： 1250g
外 徑： 50 mm
錘頭重量： 60g
錘頭半徑： 10mm
沖擊組件： 包括擊發球柄與錘頭，重量為250g，錘頭由白色聚先亞胺制成
沖擊釋放力：小于10N
PTL Spring-operated Impact-Test Apparatus F 22.50
for impact tests to demonstrate the level of robustness according to IEC, EN, VDE in accordance with e. g.: IEC 60068-2-75/ 1997-08 §5 and An. E
Standard Outfit:
1 body, including release mechanism and striking element guide, mass 1250 g, outside diameter 50 mm,
1 striking element, with cocking knob and with hammer head, face of polyamide, spherical segment shape with a radius of 10 mm, mass 250 g, length approx. 315 mm,
1 release cone, mass 60 g,
1 helical compression spring, mass approx. 9 g,
total length cocked approx. 350 mm, total mass approx. 1570 g,
supplied ready for operation, including PTL certificate concerning calibration of impact energy by means of a calibration device according to IEC 60068-2-75 / 1997-08 Annex B and concerning release pressure,
Impact energy Tolerance Article No.:
0,14 J ± 0,014 J F 22.10
0,20 J ± 0,02 J F 22.11
0,35 J ± 0,03 J F 22.15
0,50 J ± 0,04 J F 22.16
0,70 J ± 0,05 J F 22.17
1,00 J ± 0,05 J F 22.18
PTL Universal Spring Hammer
as described above, but with the five impact energies 0,20 J, 0,35 J, 0,50 J, 0,70 J and 1,00 J, to be selected by means of a disk with knurled edge, tolerances as scheduled above, supplied with PTL calibration certificate concerning the five impact energies and the release pressure, Article No.: F 22.50
PTL spring-operated impact-test apparatuses with other impact energies, e. g. 2 J (F 22.20), other masses of the striking element, e. g. 500 g (F 22.20), other release forces, e. g. 20 N, and other hammer heads, e. g. made of steel with r = 25 mm (F 22.20):on special request
Preserving Case,
made of wood, to keep one spring-operated impact-test apparatus, with floccular coated holders
